Sump Pump Installation in Arlington, TX

What Is a Sump Pump?

A sump pump is an invaluable device that prevents basements or crawlspaces from flooding in Arlington. Located within its own sump pit in the lowest corner, when water collects around it, it starts flowing back out through its pipes to an external drainage location safely away from the foundation. Thus, it prevents flooding as well as costly water damage in severe rainstorms that occur regularly here.

The Importance of Sump Pump Installation

• Prevents Flooding: With unpredictable weather in Arlington and occasional storms, installing a sump pump ensures your basement or crawlspace stays dry and out of harm's way.
• Foundation Protection: Too much moisture can wreak havoc with your home's foundation over time, so having a properly installed sump pump helps preserve it for future use.
• Reduce Mold and Mildew: Standing water can quickly lead to mold growth in basements, which can cause respiratory illnesses for those who live there.
• Increases Property Value: Potential buyers see homes equipped with sump pumps as more well-maintained and of higher value, which increases property values.

Getting Started With Sump Pump Installation in Arlington

Before commencing sump pump installation in your Arlington home or business, you must assess its specific requirements. No two homes or sump pump systems are alike - here is a short checklist with key factors for consideration:

Select an Appropriate Sump Pump

• Pedestal Sump Pumps: Ideal for smaller pits with their motor situated above water level.
• Submersible Sump Pumps (SUPs) are quieter alternatives that sit inside your pit beneath its contents. They are ideal if space in your pit is limited and noise pollution becomes an issue.

Determine Pump Capacity

Pump capacity is often measured in terms of gallons per hour (GPH), with most homes typically needing something with between 2,000-3,000 GPH capacity for optimal operation.

Backup Power Source

A battery backup system ensures your sump pump continues working during power outages caused by severe storms, helping ensure you remain uninterrupted with operations.

Steps for Sump Pump Installation in Arlington

Digging the Sump Pit

• Choose a low-lying area in your basement or crawlspace.
• Dig a pit roughly 2 feet deep and wide enough for the sump pump.

Installing the Pump

• Place gravel at the bottom of the pit for a stable base.
• Position the sump pump inside the pit on top of the gravel.
• Connect the pump to a discharge pipe leading outside.

Discharging Water Safely

• The discharge pipe should direct water at least 10 feet from the house.
• Avoid connecting it to the main sewage line.

Testing the Pump

Pour a bucket of water into the pit to ensure the pump activates and discharges water properly.

Sealing the Pit

Cover the pit with a lid to prevent debris from clogging the pump.

Sump Pump Repair in Arlington, TX

Even with proper installation and regular maintenance and repair of sump pumps to extend their longevity and ensure peak performance, they do require repair at some point over time. Below are some indicators your sump needs repair: